Fuji Xerox DocuPrint CM305 df Service Manual page 722

- IIT I/O Check
- Executing IIT I/O Check
1) Turn off the power.
2) Turn on the power while holding down "" and "" keys.
3) Release the fingers from these keys when "the message" is displayed.
4) The "Service Mode", "Printer" and "FAX/Scanner" are displayed. (Entered the CE Diag.
Mode.)
5) Press "" key to select the "FAX/Scanner" and press "OK" key. (Entered the Fax/Scanner
Diag. mode.)
6) Press "" key to select the "Scanner Maintenance" and press "OK" key.
7) Press "" key to select the "IIT I/O Check".
8) Press "" or "" key to select the test item and press "OK" key to execute.
To exit the test or to returning to one step higher menu, press "STOP" key.
NOTE
Parameters for the IIT I/O Check are as follows
Home Pos Sensor
Tray Sensor
Feed Sensor
ADF Cover Sensor
Lamp
FB Motor
ADF Motor
Sensor name
Home Position Sensor
Document Sensor
Feed Sensor
ADF Cover Sensor
Lamp
Carriage Motor
ADF Motor
Components
6 – 76
Chapter 6 General