Fuji Xerox DocuPrint CM305 df Service Manual page 361

31) Remove the BEARING R from the
ROLL ASSY REGI.
When carrying out the work
NOTE
this procedure, it is easier to
push the ROLL REGI
METAL (PL3.2.10) to
frontward.
32) Shift the ROLL ASSY REGI to left
to remove the right shaft of the
ROLL ASSY REGI, remove the
ROLL ASSY REGI from the
FEEDER ASSY MG AIO (PL3.1.98)
together with the ACTUATOR REGI
OUT and the ACTUATOR REGI
ROLL M.
When carrying out the work
NOTE
this procedure, move the
ACTUATOR REGI OUT to
right until it stops.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 85