Step
10
Is the image printed correctly?
Checking after resetting the HOLDER ASSY SEPARATOR
11
Reseat the HOLDER ASSY SEPARATOR.
Is the image printed correctly?
Checking after replacing the HOLDER ASSY SEPARATOR.
Replace the KIT HOLDER ASSY SEPARATOR. (Refer to
12
REP2.2.)
Is the image printed correctly?
Checking after resetting the ROLL ASSY FEED.
13
Reseat the ROLL ASSY FEED.
Is the image printed correctly?
Check
3 - 46
Chapter 3 Image Quality Troubleshooting
Remedy
Yes
End of work.
End of work.
End of work.
End of work.
No
Go to step 11.
Go to step 12.
Go to step 13.
Replace the KIT
ROLL ASSY
FEED. (Refer to
REP3.3.)