Fuji Xerox DocuPrint CM305 df Service Manual page 231

Step
Does the Toner Dispenser Motor function normally?
Checked by [Digital Output] - [Yellow Toner Motor,Magenta
17
Toner Motor,Cyan Toner Motor,Black Toner Motor] in [IOT
Diag] of diagnosis.
18 Is the image printed correctly?
Checking after resetting the PWBA MCU.
19 Reseat the PWBA MCU.
Is the image printed correctly?
Checking after resetting the PWBA ESS AIO.
20 Reseat the PWBA ESS AIO.
Is the image printed correctly?
Checking after resetting the TRANSFER ASSY.
21 Reseat the TRANSFER ASSY.
Is the image printed correctly?
Checking after replacing the TRANSFER ASSY.
22 Replace the KIT TRANSFER ASSY. (Refer to REP6.3.)
Is the image printed correctly?
Checking after replacing the PHD ASSY.
23 Replace the PHD ASSY. (Refer to REP4.6.)
Is the image printed correctly?
Checking after resetting the PWBA HVPS.
24 Reseat the PWBA HVPS.
Is the image printed correctly?
Checking after replacing the DISPENSER ASSY.
25 Replace the DISPENSER ASSY. (Refer to REP5.1.)
Is the image printed correctly?
Checking after replacing the KIT ROS.
26 Replace the KIT ROS. (Refer to REP4.1.)
Is the image printed correctly?
Check
3 - 9
Chapter 3 Image Quality Troubleshooting
Remedy
Yes
Go to step 19.
End of work.
End of work.
End of work.
End of work.
End of work.
End of work.
End of work.
End of work.
End of work.
No
Replace the
DISPENSER
ASSY. (Refer to
REP5.1.), then go
to step 18.
Go to step 19.
Go to step 20.
Go to step 21.
Go to step 22.
Go to step 23.
Go to step 24.
Go to step 25.
Go to step 26.
Replace the
PWBA HVPS.
(Refer to REP4.5.)