THUNDER TIGER Titan Raptor 50 Size 3D Heli Assembly & Maintenance Manual page 9

6 Main Frame Assembly-Part2
Please complete subassemblies 6-1 through 6-4, them add them to the main frame.
Insert the completed elevator control arm subassembly 6-1 in between upper bearing frame first. Then fit
the plastic pitch control frame subassembly. Next insert elevator arm control shaft and elevator parallel
lever subassembly. Then secure the plastic pitch control arm using self tapping screw (M3x12) and self
tapping screw(M3x22). Adjust the two self tapping screw so the pitch control arm can rock freely but without
excessively play. Add a drop of CA to the two screws at the pivoting point of the collective pitch control
arm.Attach the linkage rod to the parallel elevator linkage balls. Finally add two plastic aileron levers and
the elevator pushrod.
(1)HSE3-18B Self Tapping Screw (M3x18).........4
(2)HSE3-12B Self Tapping Screw (M3x12).........1
(3)HMJ3-22B Self Tapping Screw (M3x22).........1
(4)HMV1280ZZY Bearing (d8xD12xW3.5)..........2
(5)HMV840ZZY Bearing (d4xD8xW3).................2
(6)BK0076 Collar (d3xD4x10)............................. 3
(7)BK0078 Collar (d3xD4x4)............................... 2
(8)BK0088 Washer (d3xD5x0.5)......................... 1
(9)BK0020 Elevator Arm Control Shaft............... 1
(10)BK0075 Linkage Ball.....................................1
(4)
(19)
(1)
(17)
(6)
(1)
(6)
(3)
(16)
(12)
66mm
(13)
Warning, do not over-torque the self-tapping screws.
(15)
(7)
(5)
(12)
(13)
(8)
(11)HMJ2-10N Self-Tapping Screw (M2x10)...... 1
(12)BK0086 Ball Link...........................................2
(13)BK0840 SUS Linkage Rod............................1
(14)BK0017 Collective Pitch Control Arm............1
(15) 6-1 Elevator Control Arm Subassembly.......1
(16) 6-2 Elevator Push Pull Lever Subassembly....1
(17) 6-3 Aileron Lever Subassembly ( R )........... 1
(18) 6-3 Aileron Lever Subassembly ( L )............1
(19) 6-4 Elevator Parallel Lever Subassembly... 1
(9)
(1)
(4)
8
(18)
(1)
(6)
(2)
(7)
(5)
(11)
(10)
(14)