*High End Blade Pitch Setting
Linkage Position for beginner
*Move the throttle/collective stick to the full throttle position(see upper right diagram). The molded "pointer"
should now line up with the upper limit mark, which should provide about 11˚ of blade pitch.
*Low End Blade Pitch Setting
*Move the throttle/collective stick to the low stick position. Use the ATV function of your transmitter to
make the "pointer" line up with the -2˚ mark for beginners(with the -5˚ mark for intermediates, and -
10˚ mark for experts).
11˚
-2˚
26
11˚
6˚
-2˚
-5˚
-10˚
Throttle at High Position
Throttle at Low Position