Hse3-12B Self Tapping Screw (M3X12) - THUNDER TIGER Titan Raptor 50 Size 3D Heli Assembly & Maintenance Manual

16 Tail Boom Assembly
Assembly Tip: Slide the 3 rod guides onto the boom and space them out evenly as shown. Then slide the tail linkage
rod into the rod guides. Next, insert the tail rotor drive belt into the boom so that it comes out of both ends. Place
drive belt over tail drive pulley and complete balance of tail boom assembly. Remember to connect the tail linkage
rod to the tail control lever. Apply thick CA or Epoxy when installing Tail support Rod End.
(1) HMC3-20B Socket Screw(M3x20)............. 4
(2) HMC3-25B Socket Screw(M3x25)............. 2
(3) HSE3-12B Self Tapping Screw(M3x12)..... 4
(4) HMM3Z Lock Nut(M3)................................ 6
(5) HMV1150X Bearing (d5xD11xW5)............. 1
(6) BK0071 Vertical Fin....................................1
(7) BK0069 Stabilizer Fin.................................1
(8) BK0046 Tail Unit Housing...........................1
(9) BK0524T Tail Support Rod......................... 2
(10) BK0070 Stabilizer Fin Bracket..................1
(12)
(14)
(17)
(13)
Add CA glue
(1)
(2)
(3)
(11)
(9)
(16)
(15)
(11) BK0859 Tail Boom.................................... 1
(12) BK0091 Rod Guide.................................. 3
(13) BK0858 Tail Rotor Drive Belt... ................1
(14) BK0860 Tail Linkage Rod......................... 1
(15) BK0447 Tail Support Rod End................. 4
(16) HMJ2-8N Seif Tapping Screw(M2x8)....... 4
(17) BK0086 Ball Link......................................2
(18) BV0052 Tail Idle Pulley............................. 1
(19) Tail Unit
(19)
(10)
(3)
16
(17)
(18)
(5)
(8)
(4)
(4)
(7)
(6)