THUNDER TIGER Titan Raptor 50 Size 3D Heli Assembly & Maintenance Manual page 15

13 Main Frame Assembly-Part5
Slide the main rotor assembly over the main shaft and align the two pins to
slide in the washout assembly. Make sure the holes in the main shaft line
up with the holes in the main rotor head. Insert the socket screw and secure
with locknut. Attach the ball linkage rods to the long end of the mixing lever
and to the remaining inside linkage balls of the swashplate.
(1) BK0616 Socket Screw(M3x20).....
(2) HMM3Z Lock Nut(M3)........................ 1
(3) HME3-18.5B Set Screw(M3x18.5)......2
(4) BK0842 SUS Linkage Rod................ 2
(5) BK0086 Ball Link............................... 4
(6) BK0626 Canopy Retaining Post........ 2
(7) Main Rotor Head Assembly
(2)
(5)
(4)
(6)
(3)
(3)
(6)
1
(7)
(1)
14
(5)
(4)
100mm