BASIC OPERATIONS
Using The Touch Panel Display
On the touch panel display, you can find keys, instructions and messages.
By touching keys on the display, you can select or deselect functions, and
enter data for the selected modes. The keys are displayed as follows:
Keys that have been
selected.
Keys you cannot select.
1.
Message area
2.
[Check Modes] key
3.
Original counter
4.
Sets to copy
5.
Copy counter
56
BASIC OPERATIONS
1
2
The machine condition is displayed here. If copy-
ing is disabled, see the message area table on
pages 178 to 180 and take actions according to
the procedure described.
When you set 2 or more copy settings, touch to
see all modes that you have selected at a glance.
The number of originals you have been copied
so far.
The number of sets that will be copied.
The number of completed copy sets for the cur-
rent job.
3
4
5
Keys you can select.