User Tool Menu - Ricoh FT9105 Operating Instructions Manual

User Tool Menu

1. User Utility
Original Display
Count Up/Down
Max. Top Tray
Capacity
Face Up/Down in
Stack Mode
Staple in Stack
Mode
The original counter can be set to show the number of
originals you have used during one copy job or the number
of originals you have used until you press the Clear Modes
key or Auto Reset comes into effect.
default: Clear Modes
(Originals until you press the Clear Modes key or Auto
Reset comes into effect.)
The copy counter can be set to show the number of copy
sets made (count up), or the number of copy sets remaining
to be made (count down).
default: UP
The copy counter counts up under the following conditions
regardless of the setting you select:
•
When you make 1 set of copies in Stack mode setting
originals in the recirculating document handler.
•
When you make 1 set of copies setting originals in
the document feeder.
As a default setting, the copier will stop copying when 200
sheets of paper are delivered to the copy tray because the
copy tray can hold up to 200 sheets of paper. You can
change this number.
100 sheets, 150 sheets, 200 sheets, No limitation
default: 200 sheets
When your copier is equipped with the optional finisher, you
can select if copies made in Stack mode will be delivered
face down (image side down) or face up (image side up).
When paper misfeed occurs in the paper delivery section
because of the curled paper, use this function. You may get
proper copies.
default: No (image side down)
When your copier is equipped with the optional finisher, you
can select if you can use Stapling in Stacking.
default: No (Stapling in Stacking is not possible.)
USER TOOLS
115