Ricoh FT9105 Operating Instructions Manual page 37

SETTING ORIGINALS IN THE RECIRCULATING DOCUMENT HANDLER
2
Open the original feed-in unit
cover.
3
Slide the lock lever to the rear
and adjust the end plate to the
original width.
4
Hold originals in your left hand
and set the originals face down
against the end plate.
Note: If you set perforated originals, the per-
forated side of the originals should be
against the end plate.
Note: When you set many originals at once,
follow the table provided on page 23 to
find out the maximum set number. If
too many originals are set in the recir-
culating document handler, original
misfeeds might occur.
5
Adjust the front and rear guides
to length of the original. Make
sure you adjust the front and rear
guides to match the size marks
on the recirculating document
handler.
Note: If you do not set originals correctly,
original misfeeds might occur.
6
28
1
2