Changing Paper Size; 1St, 2Nd, And 3Rd Paper Tray - Ricoh FT9105 Operating Instructions Manual

1st, 2nd, And 3rd Paper Tray

When you want to change the paper size of the optional large capacity tray,
contact your service representative.
When you use only one size of paper, your service representative can lock the
front and rear guides.
1
Press the Down key.
2
After the Down key stops blink-
ing, pull the tray all the way out.
3
While pressing the release lever
on the rear side guide, slide the
front and rear guides completely
away from each other. Then,
slide out end plate completely.
4
Load the paper.
Align the paper with the correspond-
ing size graduations on the bottom
plate.
The paper stack must be flush with
the left side fence.
Do not stack paper over the limit
mark.
Stack paper evenly.

CHANGING PAPER SIZE

CHANGING PAPER SIZE
47