Basic Operations When Using Scan To Folder - Ricoh en5100wd Operating Instructions Manual

Basic Operations When Using Scan to Folder

This section describes the basic operations involved in using Scan to Folder.
1. Make sure that no previous settings remain.
If a previous setting remains, press the [Clear Modes] key.
2. If the network delivery scanner screen or E-mail screen appears, switch to the Scan to
Folder screen.
For details, see "Switching to the Scan to Folder Screen".
3. If necessary, press [Scan Settings] to specify scanner settings such as resolution and scan
size.
For details, see "Various Scan Settings".
4. If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
5. If necessary, press [Next Original Wait].
For details, see "Waiting for Additional Originals".
6. If necessary, press [Original Feed Type] to specify settings such as the original orientation
and output exit.
For details, see "Setting of Original Feed Type".
Basic Operations When Using Scan to Folder
57