Setting Originals On The Exposure Glass - Ricoh FT9105 Operating Instructions Manual

SETTING ORIGINALS ON THE EXPOSURE
.
1
Lift the recirculating document
handler.
.
2
Set the original face down on the
exposure glass. The original
should be centered according to
the paper size marks on the right
scale.
When you set an original on the ex-
posure glass, Auto Paper Select
mode cannot be used. You should
select the paper size.
.
3
Lower the recirculating document
handler.
When you set a book original on the
exposure glass, do not force down
the recirculating document handler.
4
Select your desired modes and
press the Start key.
Copies of the same original are deliv-
ered to the copy tray or shift tray in
turn.

SETTING ORIGINALS ON THE EXPOSURE GLASS

GLASS
35