Ricoh FT9105 Operating Instructions Manual page 126

Copy onto Slip
/Tab Sheet
Tabs
3. Copy Original/Size
A3/11" x 17"
Selection
A4/8 " x 13"
1/2
Selection
4. Auto Image Density Level
You can change the image density level in 3 steps when Auto Image Density
mode is selected.
default: Normal
In Paper Designate mode, the original image is copied onto
slip or tab sheets as a default setting. You can cancel this
setting, and get blank slip/tab sheets. The designated
original image is not copied.
default: Yes (The slip or tab sheet has an original image.)
You can designate the 3rd tray as a tab sheet tray. If you
select the [Tray 3] key, you can always see "Tabs" in the
3rd tray key and it is not selected by the Auto Paper Select
or Auto Tray Switching.
default: The 3rd tray is not designated as a tab sheet tray.
Paper and original sizes are identified. For details,
page 135.
default: metric version:
inch version:
Paper sizes are identified.
default: metric version:
inch version:
If you change from 8
enable the use of the optional large capacity tray. For
details, see page 135.
A3
11" x 17"
A4
A4
" x 13" to A4, use user tool #10 to
1/2
USER TOOLS
see
117