Making Two-Sided Or One-Sided Copies (Duplex) - Ricoh FT9105 Operating Instructions Manual

MAKING TWO-SIDED OR ONE-SIDED COPIES
Remove the copies before the number of copies on the copy tray or shift tray
exceeds 80 sheets. Otherwise, the copies may stick to each other because toner
on the copies is still hot.
You can use 64 to 120 g/m
Sided Copy and 1 Sided Originals To 2 Sided Copy modes.
The number of sheets that can be stored in the duplex tray is limited according to
weight and size of the copy paper.
When you set one original at a time on the exposure glass or in the document
feeder, the maximum number of copies that can be set in 1 Sided Originals To 2
Sided Copy mode or 2 Sided Original To 2 Sided Copy mode varies for each kind
of copy paper, as shown in the table below.
When you set a stack of originals in the recirculating document handler or docu-
ment feeder, the numbers in the table below show the maximum numbers of
originals that can be set in 2 Sided Original To 2 Sided Copy mode and the
maximum numbers of copies that can be set in 1 Sided Originals To 2 Sided
Copy mode for each kind of copy paper.
(The original set capacity also varies according to weight and size of originals as
shown in page 23. If the numbers indicated in the tables below and in page 23
are different for weight and size of the copy paper and original you use, you can
set originals up to the smaller number.)
A3, B4, 11" x 17",
8 " x 14"
1/2
A4, B5, 8 " x 13",
1/2
8 " x 11"
1/2

MAKING TWO-SIDED OR ONE-SIDED COPIES (DUPLEX)

2
, 17 to 32 lb copy paper for 2 Sided Original To 2
2
64 g/m , 17 lb 80 g/m
50
80
2 2
, 20 lb 90 g/m , 24 lb
40 35
80 70
(DUPLEX)
2
105 g/m , 120 g/m
28 lb 32 lb
30 26
61 53
87
2
,