Ricoh FT9105 Operating Instructions Manual page 84

How to set Paper Designate mode using tab sheets (Tab
Sheet)
Note: When you select Tab Sheet mode with 2 Sided Copy mode, the original im-
age is copied onto only 1 side of tab sheets and the other side of tab sheets
will be blank.
Regarding loading tab sheets in the paper tray,
When you use Tab Sheet mode with Margin Adjustment mode, the margin does
not apply to tab sheets.
When you use Tab Sheet mode with Erase Center/Border mode, the erase mar-
gin does not apply to tab sheets.
Before using this function, you should set the number of tabs (
the user tools.
The copying speed in Tab Sheet mode will be reduced.
You can use A4, 8
In this mode, as the default setting, the original image is shifted by 13 mm and
copied on the tab sheets as shown in the illustration. You can change this setting
with the user tools.
You cannot use Stapling in Tab Sheet mode.
When you use Sort mode in Tab Sheet mode, the copies delivered to the shift
tray might not be stacked well.
a
1
Prepare the same size copy paper (except for the width of the margin)
as the tab sheets.
See page 78.
See page 120.
" x 11" tab sheets.
1/2
See page 120.
13 mm
8 mm
5 mm
COVER/PAPER DESIGNATE
see page 45.
13 mm
a
!
see step ) with
75