Preparing The System To Remove And Replace The Expanded Function System Backplane - IBM Power System 8247-42L Manual

To complete these procedures, you need to print the following topics. If the IBM Power Systems
Hardware Knowledge Center is available on a PC or a notebook that is close to the system on which you
are servicing parts, you can use the online version.
v Control panel (http://www.ibm.com/support/knowledgecenter/POWER8/p8hbc/
p8hbc_82x_84x_kickoff.htm)
v Disk drives or solid-state drives (http://www.ibm.com/support/knowledgecenter/POWER8/p8hal/
p8hal_82x_84x_rnr_poweroff_kickoff.htm)
v Media devices (http://www.ibm.com/support/knowledgecenter/POWER8/p8hap/
p8hap_8xx_removingslmedia.htm)
v Fans and fan cage (http://www.ibm.com/support/knowledgecenter/POWER8/p8haq/
p8haq_82x_84x_kickoff.htm)
v Disk drive backplane (http://www.ibm.com/support/knowledgecenter/POWER8/p8eg5/
p8eg5_82x_84x_hf_kickoff.htm)
v Front SAS cable ( http://www.ibm.com/support/knowledgecenter/POWER8/p8eg7/
p8eg7_82x_84x_kickoff.htm)
v Front USB cable (http://www.ibm.com/support/knowledgecenter/POWER8/p8ege/
p8ege_82x_84x_kickoff.htm)
v PCIe3 x8 cache SAS RAID internal adapter 6Gb (http://www.ibm.com/support/knowledgecenter/
POWER8/p8eg6/p8eg6_82x_84x_kickoff.htm)
v Memory modules (http://www.ibm.com/support/knowledgecenter/POWER8/p8han/
p8han_82x_84x_rr_kickoff.htm)
v System processor modules (http://www.ibm.com/support/knowledgecenter/POWER8/p8ede/
p8ede_82x_84x_kickoff.htm)
v Time-of-day battery (http://www.ibm.com/support/knowledgecenter/POWER8/p8eg4/
p8eg4_82x_84x_rnr_kickoff.htm)
v Vital Product Data card (http://www.ibm.com/support/knowledgecenter/POWER8/p8edf/
p8edf_82x_84x_kickoff.htm)
v Power supplies (http://www.ibm.com/support/knowledgecenter/POWER8/p8hbd/
p8hbd_82x_84x_powersupplyoff.htm)
v Rear SAS cable (http://www.ibm.com/support/knowledgecenter/POWER8/p8egd/
p8egd_82x_84x_kickoff.htm)
v Rear USB cable (http://www.ibm.com/support/knowledgecenter/POWER8/p8egf/
p8egf_82x_84x_rr_kickoff.htm)
v PCI adapters (http://www.ibm.com/support/knowledgecenter/POWER8/p8hak/
p8hak_82x_84x_rnr_poweroff_kickoff.htm)
v System I/O card (http://www.ibm.com/support/knowledgecenter/POWER8/p8egl/
p8egl_82x_84x_rnr_kickoff.htm)
Preparing the system to remove and replace the expanded function
system backplane
Use this procedure to prepare the system to remove and replace the expanded function system backplane.
Note: It is recommended that a spare TIM and heat sink, (part number 00E8868), be on hand when
replacing the system processor module into the replacement system backplane.
Before you begin this procedure, ensure that you have authority to log in as an authorized service
provider. The authority levels are described in ASMI authority levels.
If your system is managed by the Hardware Management Console (HMC), use the HMC to repair a part
in the system. For instructions, see "Repairing a part by using the HMC" on page 161.
58
System backplane