IBM Power System 8247-42L Manual page 125

Figure 107. Pinhole switch that is on the control panel
22. Go to step 13 on page 104.
23. Change the admin user ID password.
Change the password of the admin user ID when prompted by completing the following steps:
a. In the navigation area of the ASMI, expand Login Profile.
b. Select Change Password under Login Profile.
c. Specify the required information, and click Continue.
As a security measure, you must enter your current user password in the Current password for
current user ID field.
Note: Passwords can be any combination of up to 64 alphanumeric characters. The default
password for the admin User ID is admin. After your initial login to the ASMI, the admin password
must be changed.
As a security measure, you must enter the password for your user ID in the Current password for
current user field.
24. Set the system name.
The system name can be changed to any valid ASCII string. It does not have to follow the machine
type_model_serial number format. To change the system name, complete the following steps:
a. In the navigation area of the ASMI, expand System Configuration.
A B
Front View
Top View
F
H
C D E
I J
G
System backplane
107