IBM Power System 8247-42L Manual page 121

v The long SAS cable connects the lower disk drive backplane connector (J1) to the P1 connector on
the SAS RAID internal adapter in slot P1-C15. See Figure 105.
Expanded Function DASD Backplane
(CCIN 2B0F)
Figure 105. Reconnecting the SAS cable in an expanded function configuration
v For information about SAS cable part numbers, see 8247-42L, 8286-41A, or 8286-42A system parts
(http://www.ibm.com/support/knowledgecenter/POWER8/p8ecs/p8ecs_82x_84x_parts.htm).
38. Replace the SAS cable cover. Place the cover slots onto the pins on the side of the chassis. The
triangle symbol on the SAS cable cover lines up with the triangle symbol on the side of the chassis
when the cover slots and pins are aligned correctly. Push the cover forward toward the front of the
system until the handle (A) latches in place. See Figure 106.
Figure 106. Replacing the SAS cable cover
39. Replace the fan cage with the fans installed. For instructions, see Replacing a fan cage
(http://www.ibm.com/support/knowledgecenter/POWER8/p8haq/
p8haq_82x_84x_fancagereplace.htm).
40. Replace the hinged air baffle. For instructions, see "Replacing the air baffle on an 8247-42L,
8286-41A, or 8286-42A system" on page 147 and "Closing the air baffle on an 8247-42L, 8286-41A, or
8286-42A system" on page 145.
Long Storage Controller
Cable
P1
J2
J1
Storage Controller
P1
Short
Cable
(CCIN 57D8)
Slot C15
(CCIN 57D8)
Slot C14
103
System backplane