Figure 99. Replacing the power distribution signal cable
24. Replace the system I/O card. For instructions, see Replacing the system I/O card with the power
turned off (http://www.ibm.com/support/knowledgecenter/POWER8/p8egl/
p8egl_82x_84x_replacespc.htm).
25. Replace the rear USB cable. For instructions, see Replacing the rear USB cable (http://
www.ibm.com/support/knowledgecenter/POWER8/p8egf/p8egf_82x_84x_rearusbcablein.htm).
26. Reconnect the front USB cable to the system backplane connector as shown in Figure 100 on page 99.
98
System backplane