Siemens SINUMERIK 840DE sl Commissioning Manual page 1301

feed='rapid'
dwell='2'/>
<!-- End of animation definition -->
</SceneKey>
Description
</SceneKey>
<!-- Existing animation as source for a new animation -->
<SceneKey source=''BoringAnimation' name=''BoringAnimationRear' mirror='
MirrorScreenX ' />
Description
<SceneKey source=''BoringAnimation'
name=''BoringAnimationRear'
mirror=' MirrorScreenX ' />
<!-- Definition of a static scene (screen), (four examples) -->
<SceneKey name='Default' time='0.026' view='camiso'
type="VIEW_3D_DRILL_CUT"/>
<SceneKey name='Cut' time='0.046' view='camside' type="VIEW_SIDE"/>
<SceneKey name='Z1ink' time='0.056' view='camside' type="VIEW_SIDE"
highLightedGroup='dad_Z1ink'/>
<SceneKey name='Z1abs' time='0.066' view='camside' type="VIEW_SIDE"
highLightedGroup='dad_Z1abs'/>
Description
<SceneKeyname='Z1abs'
time='0.066'
view='camside'
type="VIEW_SIDE"
highLightedGroup='dad_Z1abs'/>
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
Traversing speed of the element
plane = machining feedrate
rapid = rapid traverse
reduced = reduced speed, slower than "plane"
Pause in the traversing motion of the anima‐
tion. A rotating tool continues to rotate.
End of the animation definition
Name of an animation that is to use another
animation as its source.
Name of the new animation based on the
source
Mirroring in the direction of the X axis, output
is in the new animation.
Screen name
Time of the screen on the time sensor
Camera to be used for the screen
View type defines the view (see Section View
type (Page 316))
Name of the group to be highlighted. The group
has been called "Z1abs" in Flux Studio. The
prefix "dad_" is automatically added by Flux.
Animated elements
C.3 XML commands
315