Mute/Microphone; Camera Presets - TANDBERG 880 MXP User Manual

MBTelehealth – Tandberg 880 MXP User Guide

3.2 Mute/Microphone

To mute the microphone:
1. Press the Mic Off key on the remote control.
2. An onscreen indicator
3. Press the Mic Off key on the remote control again to turn the mute off. The
onscreen indicator will disappear from the screen.
Make sure your site is on mute before making a call to the far end. Turn
the mute off when you are ready to begin the session.

3.3 Camera Presets

Camera presets are useful when pictures from many different camera positions and
video sources have to be viewed by the far end. Presets are used to switch camera
positions without having to manually move the camera every time.
Presets can be established before or during a call.
The camera presets are available from the number keys on the remote control when in a
call or by using the preset button when not in a call.
3.3.1 Standardized Presets
MBTelehealth recommends setting the following setting the following camera presets for
each video conference event:
1. Sign - The first preset is of a sign with the sites name. This is an off screen
camera view that allows users to move about the room without being on camera
and identifies the sites that are connected. The equipment should always be set
to the sign preset before connecting to an event.
2. You (Presenter/Provider/Patient) – This preset is a close up view of the person or
persons involved in the event. Whether it is the patient, provider or a presenter,
when setting this preset, you want to ensure that the far sites are able see the
person clearly.
3. Room –Part of video conference etiquette includes making the sites you are
connected to aware of everyone involved in the event. By setting a preset of the
entire room, you can easily identify everyone in attendance and then switch back
to preset number 2 as necessary. This preset is also helpful for question and
answer periods.
4. Video Source (PC/Patient Camera/Document Camera) – Video Sources can be
set as presets or accessed used the video source buttons on the remote control.
Setting these presets provides consistency for users and service desk staff for all
telehealth equipment.
3.3.2 Saving Camera Presets
will appear when the microphone is off.
Page 8 of 31