Drive Bay Installation/Removal - Supero SUPERSERVER 6014P-T User Manual

S S
UPER ERVER 6014P-T/6014P-TR User's Manual
Figure 6-2. Removing the Fan Housing
6-4

Drive Bay Installation/Removal

Accessing the Drive Bays
Serial ATA Drives: Because of their hotswap capability, you do not need to access
the inside of the chassis or power down the system to install or replace SATA drives.
Proceed to the next step for instructions.
Note: You must use standard 1" high, Serial ATA drives in the SuperServer 6014P-
T/6014P-TR.
DVD/CD-ROM/Floppy Disk Drives: For installing/removing a DVD/CD-ROM or
fl oppy disk drive, you will need to gain access to the inside of the system by remov-
ing the top cover of the chassis. Proceed to the "DVD/CD-ROM and Floppy Drive
Installation" section later in this chapter for instructions.
Note: Only "slim" DVD/CD-ROM and fl oppy drives will fi t into the 6014P-T/6014P-
TR.
6-4