S
S
UPER
ERVER 6014P-T/6014P-TR User's Manual
confi guration, which requires modules of the same size and speed to be installed
in pairs. You should not mix modules of different sizes and/or speeds.
Memory Speed Jumpers
Depending on what type of memory you use, you may need to change the XJ4F1
and XJ4F2 (Memory Speed Select) jumpers. See pages 5-10, 5-11 and 5-20 for
details.
Figure 5-5a. Side View of DIMM Installation into Slot
To Install: Insert module vertically and press down until it snaps into
place. Pay attention to the bottom notch.
To Remove: Use your thumbs to gently push each release tab outward to
free the DIMM from the slot.
Figure 5-5b. Top View of DIMM Slot
5-8