Supero SUPERSERVER 6014P-T User Manual page 106

S S
UPER ERVER 6014P-T/6014P-TR User's Manual
Creating Arrays
Before creating arrays, make sure the disks for the array are connected and
installed in your system. Note that disks with no usable space, or disks that
are un-initialized are shown in gray and cannot be used. See Initializing Disk
Drives.
To create an array
1. Turn on your computer and press Ctrl+A when prompted to access the ARC
utility.
2. From the ARC menu, select Array Confi guration Utility Main Menu (ACU)
(as shown on the fi rst screen on page B-4).
3. From the ACU menu select Create Array.
4. Select the disks for the new array and press Insert (as shown on the the
screen below).
Note: To deselect any disk, highlight the disk and press Delete.
5. Press Enter when both disks for the new array are selected. The Array Prop-
erties menu displays (as the shown on the screen on the next page).
B-6