Supero SUPERSERVER 6014P-T User Manual page 84

S S
UPER ERVER 6014P-T/6014P-TR User's Manual
ECC Error Type
This setting lets you select which type of interrupt to be activated as a result of an
ECC error. The options are None, NMI (Non-Maskable Interrupt), SMI (System
Management Interrupt) and SCI (System Control Interrupt.)
SERR Signal Condition
This setting specifi es the ECC Error conditions that an SERR# is to be asserted.
The options are None, Single Bit, Multiple Bit and Both.
USB Function
This setting allows you to Enable or Disable all functions for the Onboard USB
devices. The options are Enabled and Disabled.
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The settings
are Enabled and Disabled.
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Hyper-threading
This setting allows you to Enable or Disable the function of Hyper-Threading.
Enabling Hyper Threading results in increased CPU performance. (Applicable
for the XP systems.)
Machine Checking
Enable to allow the operating system to debug a system crash after a reset.
The options are Disabled and Enabled.
Adjacent Cache Line Prefetch
The CPU fetches the cache line for 64 bytes if Disabled. The CPU fetches both
cache lines for 128 bytes as comprised if Enabled.
Processor Power Management
This feature allows you to decide how processor power is managed. If set to
Disabled, processor power is not managed based on the power demand on the
CPU, and demand-based power switching is not allowed. If set to GV3, processor
power will be controlled by the Bus Ratio and CPU voltage. Demand-based
switching is allowed. The options are Disabled and GV3.
7-12