Uid Button & Uid Led; Power Button; Chassis Intrusion; Jlan1/2 (Ethernet Ports) - Supero SUPERSERVER 6014P-T User Manual

S S
UPER ERVER 6014P-T/6014P-TR User's Manual
UID Button & UID LED
A Unit Identifi er button/LED is located
next to the VGA port on the rear of
the chassis and a UID LED and
button (separate) are located on the
front control panel. The UID LED con-
nection is located on pins 3 and 4 of
JF1. Refer to the table on the right
for pin defi nitions and to page 5-21
for details.

Power Button

The Power Button connection is
located on pins 1 and 2 of JF1. Mo-
mentarily contacting both pins will
power on/off the system. This button
can also be confi gured to function
as a suspend button (see setting in
BIOS). To turn off power in suspend
mode, depress the button for at least
4 seconds.

Chassis Intrusion

A Chassis Intrusion header is located
at JL1. Attach the appropriate cable
to inform you of a chassis intrusion.

JLAN1/2 (Ethernet Ports)

Two gigabit Ethernet ports are located
beside the VGA port. These ports ac-
cept RJ45 type cables.
Pin Defi nitions (JF1)
Pin#
3
4
Pin Defi nitions (JF1)
Pin#
1
2
Chassis Intrusion
Pin Defi nitions (JL1)
Pin#
1
2
5-14
UID & UID_LED
Defi nition
Front UID
UID_LED
Power Button
Defi nition
PW_ON
Ground
Defi nition
Intrusion Input
Ground