Configure The Lan (Ipv6); Figure 5-12 Dhcp Binding - Zte ZXHN H268A Maintenance Management Manual

5. Click Apply button to apply the changes.
DHCP Binding
6. Click DHCP Binding to open the DHCP Binding page, as shown in

Figure 5-12 DHCP Binding

7. Configure the DHCP binding parameters.
Table 5-6
Table 5-6 DHCP Binding Parameters
Parameter
Name
MAC Address
IP Address
8. Click Apply button to apply the changes.
– End of Steps –

5.2.3 Configure the LAN (IPv6)

The section describes how to configure LAN (IPv6).
The relevant information of Internet status includes Allocated Address, DHCP Server,
StaticPrefix and RA Service.
Prerequisite
Before configuring the prefix delegation, make sure that the prefix delegation is enabled
for the specified IPv6 WAN connection.
Steps
Allocated Address
1. On the main page of the ZXHN H268A, select Local Network > LAN > IPv6 to open
the Allocated Address page.
SJ-20150916162339-007|2017-02-16 (R1.0)
lists the DHCP binding parameters.
Description
The name of the DHCP binding.
The MAC address of the DHCP binding.
IP address of the DHCP binding.
Chapter 5 Configure the Local Network
5-9
ZTE Proprietary and Confidential
Figure 5-12.