Configure The Mirror; Figure 7-6 Configuration Management - Zte ZXHN H268A Maintenance Management Manual

ZXHN H268A Maintenance Management Manual(EXETEL)

Figure 7-6 Configuration Management

2. On The procedure, you can perform the following operations:
l
Click Backup Configuration to export the user configuration file.
l
Click Browse to select the user configuration file, and then click Restore
Configuration to restore the device to open the user configuration.
After the user configuration file is imported, the system will restart.
– End of Steps –

7.4 Configure the Mirror

This procedure introduces how to perform the mirror configuration.
If the mirror configuration is performed, the packets at the WAN side will be copied
to open the specified LAN interface, and it can be used for the network analysis and
troubleshooting.
Steps
1. On the main page of the ZXHN H268A, select Management & Diagnosis > Mirror
Configuration to open the Mirror Configuration page, as shown in
SJ-20150916162339-007|2017-02-16 (R1.0)
Note:
7-6
ZTE Proprietary and Confidential
Figure 7-7.