Configure The Wlan Advanced Parameters; Figure 5-6 Wlan Advanced; Figure 5-7 Access Control-Rule Settings - Zte ZXHN H268A Maintenance Management Manual

8. Click Apply button to apply the changes.
– End of Steps –

5.1.3 Configure the WLAN Advanced Parameters

The section describes how to configure WLAN advanced. WLAN Advanced provides the
parameters of WLAN advanced configuration features.
Steps
Access Control-Mode Settings
1. On the main page of the ZXHN H268A, select Local Network > WLAN > WLAN
Advanced to open the Access Control-Mode Settings page, as shown in
5-6.

Figure 5-6 WLAN Advanced

2. Select the access control-mode.Click Apply button to apply the changes.
Access Control-Rule Settings
3. Configure the access control-rule setting parameters.
4. Click
configuration, as shown in

Figure 5-7 Access Control-Rule Settings

5. Configure the access control-rule settings parameters.
Table 5-4
SJ-20150916162339-007|2017-02-16 (R1.0)
Figure
lists the access control-rule settings parameters.
Chapter 5 Configure the Local Network
to open the page of access control-rule settings
5-7.
5-5
ZTE Proprietary and Confidential
Figure