Figure 4-2 Dhcp (Ipv4) Connection Page - Zte ZXHN H268A Maintenance Management Manual

Figure 4-2 DHCP (IPv4) connection Page

10. Click Apply button to apply the changes.
11. Select Internet > Status > DSL > DSL Connection Status to open the DSL
Connection Status page.
address getting from carries can verify that the WAN connection based on IP
was completed successfully.
Table 4-1 New Item Parameters
Parameter
Connection Name
DSL Transfer Mode
VPI/VCI
Service Type
PCR
SCR
SJ-20150916162339-007|2017-02-16 (R1.0)
Click Refresh to get the latest information.
Table 4-1 describes the new item parameters.
Description
Name the connection.
There are two DSL transfer modes:
Enter the VPI/VCI values provided by the ISP.
VPI Range: 0 - 255
VCI Range: 0 - 65535
The options are: CBR, VBR-nrt, VBR-rt and UBR.
If Service Type is selected to be CBR, VBR-nrt or VBR-rt, PCR
needs to be configured.
Range: 1 – 2000
Sustainable Cell Rate, range :10000 – 19999
If Service Type is selected to be VBR-nrt or VBR-rt, SCR
needs to be configured.
4-5
Chapter 4 Configure the Internet
ATM and PTM.
ZTE Proprietary and Confidential
The IP