Configure The Ddns - Zte ZXHN H268A Maintenance Management Manual

2. Configure the port forwarding parameters.
Table 4-7
Table 4-7 Port Forwarding parameters
Parameter
Port Forwarding Switch
Name
Protocol
LAN Host
WAN Port
LAN Host Port
3. Click Apply button to apply the changes.
l
This function allows users to access the virtual hosts of LAN side from WAN side.
l
By using port forwarding, the accessing to hosts between assigned IP and port
from WAN side is forwarded to one host of LAN side.
– End of Steps –

4.4 Configure the DDNS

The section describes how to configure DDNS. DDNS provides the parameters of DDNS
configuration function.
Steps
1. On the main page of the ZXHN H268A, select Internet > DDNS to open the DDNS
page, as shown in
SJ-20150916162339-007|2017-02-16 (R1.0)
lists the port forwarding settings parameters.
Note:
Figure 4-11.
Chapter 4 Configure the Internet
Description
Enable or disable the Port Forwarding function.
Virtual host name, which cannot be null.
Protocol name, including TCP and UDP.
The default protocol is TCP.
IPv4 address or MAC address of the LAN side host.
Port segment of the WAN-side hosts. Range: 1~65535.
Port number range of the LAN-side host. Range: 1~65535.
4-17
ZTE Proprietary and Confidential