Configure The Lan(Ipv6) - Zte ZXHN H3600 Maintenance Management Manual

Figure 6-10 Port Control
2. Configure the port control parameters.
Click All On to select all ports.

Click All Off to cancel all ports.

3. Click Apply button to apply the changes.

6.3.2 Configure the LAN(IPv6)

The section describes how to configure LAN(IPv6).
The relevant information of Internet status includes Allocated Address(DHCPv6), LAN
Address Management, Static Prefix, DHCPv6 Server, RA Service, Port Control .
Prerequisite
Before configuring the prefix delegation, make sure that the prefix delegation is enabled
for the specified IPv6 WAN connection.
Steps
Check the Allocated Address(DHCPv6)
1. On the main page of the ZXHN H3600, select Local Network > LAN > IPv6 to the
IPv6 page.
2. Click Allocated Address (DHCPv6) to the configuration page, see
SJ-20201203151144-003 | 2021-06-16(R1.0)
6 Configure the Local Network
Figure 6-11.
57