Siemens interranger DPS300 Instructional Manual page 70

To save a manual record:
Pressing
in the scope buffer and saves it in the
selected address in the record library. The
parameter value field displays the new
record ordinates.
To display a record
Pressing
record in the selected address to the scope
buffer, for display.
To delete a record:
Pressing
record in the selected address. Parameter
value returns
to ` - - - - '.
* Access the Scope Displays (P810) parameter to select the Transducer.
P331 (G) Auto Record Enable
Use this feature (if desired) to enable/disable the Auto Profile Record function.
Values:
0 = off
1 = on
P 332 (G) Auto Record Transducer
Use this feature (if desired) to specify the Transducer Point Number for which
Auto Profile Records are saved.
This Feature is preset to Point Number 1.
Values:
0 = any Transducer
1 = Transducer 1 (preset)
2 = Transducer 2
P333 (G) Auto Record Interval
Enter the time (in minutes) to elapse after an Auto Profile Record is saved before
another Auto Profile Record can be saved (subject to all other restrictions).
Values:
InterRanger DPS300
copies the echo profile record
copies the echo profile
deletes the echo profile
0.000 to 9999 (preset to 120 minutes)
70
e.g. manually initiated record from transducer 1
saved in address 2
e.g. oscilloscope displays record
in address 3
e.g. record deleted, address 3
clear
7ML19981BC01