Siemens interranger DPS300 Instructional Manual page 27

Assembling the Mounting Assembly
Assemble the rail brackets, upper and lower, to the base plate
Assemble the extension arms, upper and lower, to the base plate by mating the arm
and plate hinges and inserting the hinge pins.
Secure each hinge pin by inserting a hitch pin through the hole at the end of the pin.
(Optional) If it is required to mount the DPS300 at the clarifier, then attach the
mounting panel to the base plate. Use the hex bolts provided to mount the
DPS300 to the mounting panel. The DPS300 is pre-drilled with the appropriate
holes.
7ML19981BC01
4.
2.
2.
27
1.
1.
3.
InterRanger DPS300