Mounting Assembly Usage
In clarifiers where skimmers are in use, the transducer must be raised to avoid
damage from the passing skimmer. If you have a Siemens Skimmer Guard, refer
to that manual before installing the Mounting Assembly.
Refer to the DPS300 system manual to determine the appropriate location for
installing the Mounting Assembly.
Components
5/16 – 18 x 1 bolt
2 washers (flat)
1 lock nut
(in hardware bag)
InterRanger DPS300
rail bracket (2)
base plate (1)
26
clevis pin (2)
u-bolts
(with nuts & washers)
(4 large & 2 small)
in hardware bag
extension arms (2)
mounting plate (1)
(for DPS300 electronics)
6-32
hex
bolts
hitch pin (2)
(4)
7/64"
hex
key
7ML19981BC01
6 – 32
threaded
hex bolts in
hardware
bag.