Table of Contents
Advertisement
MAINTENANCE
The DPS300 should require little maintenance, though good housekeeping
practices in and around the area of the enclosure are recommended.
Wipe out the area of the enclosure lid docking bay recess with a clean dry cloth (if
necessary) before installing the programmer.
Inspect the transducer regularly. By nature of its ultrasonic emissions, the face
has self cleaning properties. However, scum and algae can build up on the sides,
and if not removed, can encroach onto the face, adversely affecting performance.
Depending on the application, the transducer face may require cleaning to
maintain an acceptable performance level.
InterRanger DPS300
7ML19981BC01
102
Advertisement
Table of Contents
