Maxpro Nvr Software Installation - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

Be fore you Begin - Disable Volume Sh adow Copy ,
Windows Backup Se rvices
Be f or e y o u B eg i n - C h a ng i n g t h e d e f a ul t W i n d o w s
Administrator Account Created By NVR
MAXPRO NVR 5.6 Installation and Configuration Guide
c. In the Value Data field type, N and then click OK..
d. Right-click on the keyword "Optimizecomplete" and then click Edit.
e. In the Value Data field, replace Yes with No. (case sensitive) Click OK..
f. Close the Registry Editor. The changes take effect when Windows is restarted.
1. Turn off the Protection settings for all the drives including OS installed drive in My
Computer -> Properties -> Advanced System Settings -> System Protection tab.
2. Select the drive under Protection settings and click Configure.
3. Under Restore Settings select Turn off system protection and click OK.
Honeywell recommends to logon with new Administrator user account for installing MAXPRO
NVR. To create a new Administrator user account and to disable the default Administrator
account, perform the following two steps as explained in:
• Step 1: Create a new user account with administrator
• Step 6: Disable the Administrator

MAXPRO NVR Software Installation

To complete the MAXPRO NVR software installation follow the procedures in these sections:
1. First, How to Install MAXPRO NVR
2. Choose the installation that best suits your requirements, and follow the appropriate
steps.
• Full Installation section on page 78: Full installation can be selected to install the
Server and Client on the same system.
• Client Installation
MAXPRO NVR desktop client on the client workstations.
I N S T A L L I N G T H E N V R S O F T W A R E
Account, page 304.
section on page
section on page 85: Client installation can be selected to install
MAXPRO NVR Software Installation
privileges, page 300
74
73