Obtain The License And Install - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6
Annotations
2.
3.
4.
Upgrade to Latest VA Packages
1.
2.
3.
Enable Extensional Smart Function
1.
2.

Obtain the License and install

1.
2.
222
Click on the Extensional Smart function tab as shown below.
Click Remove to remove the old VA package. Clear the alarm check box and then and
save. Once it is saved click remove button, otherwise remove button will be in disable
state only. Vice versa, it should be selected and saved to open VA Webpage.
Repeat the step 1 through step 3 to remove the old VA package of Loitering trace.
In th same camera web-page, navigate to System Setup > Upgrade. The Firmware
Upgrade page is displayed as shown below.
Click the Import button and then browse the latest VA packages (Intrusion trace and
Loitering trace) to import.
Click Upgrade. Once the upgrade complete, VA package upgrade successful message is
displayed.
Navigate to Video Analytics > Smart Plan. The Smart Plan page is displayed.
If the Extensional Smart function is off, click to turn ON to configure and use Annotation
feature.
Contact Honeywell Technical Support to obtain the license for Intrusion Trace and
Loitering Trace features.
In the Extensional Smart function page, for a specific feature, click the Open button. For
example Intrusion Trace as shown below.
MAXPRO NVR 5.6 Installation and Configuration Guide