Figure 6-35 Camera Page - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6
Configuring the Cameras
2.
Figure 6-35
Note:
3.
170
Click the Camera tab to open the Camera page.
Camera page
All analog cameras that are pre-configured in the factory image appear in the
Camera page when you first open it.
Under the Camera pane, select a camera to change the default parameters for the
following settings.
• Enable/Disable - Enables or disables a camera for recording and live video. By
default the check box corresponding to a camera to enable live video preview is
selected. To disable live video preview, clear the check box corresponding to a
camera. The live video appears under Video Preview at the bottom right corner of
the Camera page.
• Number - Displays the camera number. You cannot modify the camera number.
MAXPRO NVR 5.6 Installation and Configuration Guide