Maxpro Nvr Web Client; Introducing Web Client; Installing Web Client - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

MAXPRO NVR Web Client

In this chapter...

Introducing Web Client

The MAXPRO NVR Web Client allows you to remotely access the MAXPRO NVR server and
perform video surveillance using a web browser such as Internet Explorer. It gives you the
flexibility to view live video and perform the basic video surveillance functions remotely over
the web.
MAXPRO NVR Web client is available with MAXPRO NVR 4.0. By default MAXPRO NVR installs
the Web client and MAXPRO Web Configurator along with the NVR 4.0 installation. You can
use the web client once you have installed the NVR 4.0.
MAXPRO NVR Web Client functions involve the following tasks:
Limitation with Privacy Protection Settings

Installing Web Client

By default MAXPRO NVR 4.0 installs the Web Client component on your machine. It also
installs the MaxproWEBConfigurator utility to change or update the system and server
configuration. If you want to access the MAXPRO NVR Server using Web Client remotely
through a supported web browser then you should install Silverlight on the remote machine.
MAXPRO NVR 5.6 Installation and Configuration Guide
Section
Introducing Web Client
Installing Web Client
Setting the MAXPRO Web Configurator
Creating Self Signed Certificate
Installing the Certificate
Procuring and Installing CA Certificate
• Viewing the live video
• Viewing Recorded Video (Playback)
• Taking Snapshot
• Viewing Presets
• Anonymization is not supported in Web. If user is tries to see Anonymized video and
also camera Anonymized option is enabled then an error message "Trying to access
Anonymized Stream" is displayed.
• When an Operator (non-admin) logs into the Web Client and tries to view playback
for any video then an error message "Four Eye authentication Privilege Failure" is
displayed.
9
See page...
267
267
268
274
278
280
267