Deleting The Saved Nvr Recorders; Changing Default Port 443 For The Maxpro Web Client And Maxpro Nvr Mobile App - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

Deleting the Saved NVR Recorders

Changing Default Port 443 for the MAXPRO Web
Client and MAXPRO NVR Mobile app
MAXPRO NVR 5.6 Installation and Configuration Guide
To delete the saved NVR Recorders:
Apple mobile device
Tap . The already saved NVRs are
displayed.
On the required NVR recorder, gently swipe
to right-side. The Edit and Delete options
are displayed as shown.
Tap Delete to delete the existing NVR
server. A warning message is displayed.
Tap Yes to delete Or Tap Cancel to retain.
See the Changing Default Port 443 for the MAXPRO Web Client and MAXPRO Mobile app
section on page 289 for more information.
Note: Honeywell recommends you to use a valid certificate from a Certificate
Authority that would ensure robust security along with integrity and
authenticity, instead of using self-signed certificate. See
Installing CA Certificate
M A X P R O N V R M O B I L E A P P
Android mobile device
Tap . The already saved NVRs are
displayed.
On the required NVR recorder, gently swipe
to right-side. The Edit and Delete options
are displayed as shown.
Tap Delete to delete the existing NVR
server. A warning message is displayed.
Tap Yes to delete Or Tap Cancel to retain.
section.
Introduction
Procuring and
311