Figure 9-1 Maxpro Webconfigurator - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

To set the Web Configurator
MAXPRO NVR 5.6 Installation and Configuration Guide
with https and registers the same with IIS to use the same. It also allows you to configure the
Silverlight control to access a service in another domain.
1. Double-click on the desktop. The MAXPRO Web Configurator dialog box
Figure 9-1 appears. By default the System Configuration tab is selected.
Figure 9-1 MAXPRO WebConfigurator
2. Under User Configuration: When the (non-window) Administrator log on name and
password is changed then you can update the credentials of MAXPRO NVR Web Client to
log on.
• Type the Username and Password and then click Update.
Note:
You can update only the NVRAdministrator credentials used by the Web Server.
If you are changing the default administrator user credentials (admin/trinity) in
NVR through the desktop client, then you should change and update the
credentials in MaxproWEBConfigurator as well for Web Server to communicate
with NVR and Web Clients.
The Administrator credentials used by the Web Server should be configured as a
non-Windows Administrator user in the MAXPRO NVR through the desktop client.
As a good security practice, it is recommended to update the default credentials
on your system.
M A X P R O N V R W E B C L I E N T
269