Deleting A Schedule; Configuring The Input And Output For A Camera - Honeywell MAXPRO Operator's Manual

C O N F I G U R I N G M A X P R O N V R
3
Note:
D
ELETING A
You can delete a schedule for the camera when you do not want to record video at recurring
intervals.
To delete a schedule
1.
2.
3.
4.
C
ONFIGURING THE
Almost all the IP cameras have one or more input and output slots that can be configured. For
example, you can configure an input of a camera to a motion detected sensor and output of a
camera to a door. In this example, if a motion is detected by the camera, the door
automatically opens.
In MAXPRO NVR, the inputs and outputs of a camera are configured by default in the
database while adding a camera. MAXPRO NVR has a specialized interface that lists the
inputs and outputs associated to the configured cameras. Camera output is also referred to as
Relay (an output contact that can be triggered from MAXPRO NVR. Relays can be connected
to devices like cameras. Relays send signals that perform various actions).
To configure input and output
1.
2.
3.
4.
50
You can create a maximum of 50 schedules in MAXPRO NVR.
S
CHEDULE
Click the Configurator tab. The System page displays by default.
Click the Schedule tab to navigate to the Schedule page.
Under Schedules, select the schedule you want to delete from the list. The schedule's
details appear.
Click Delete, and then click Yes in response to the confirmation message.
I
NPUT AND
Click the Configurator tab. The System page displays by default.
Click the I/O tab to open the I/O page.
Figure 3-4 IO page
The Input(s) pane lists the inputs for the configured cameras.
The Output(s) pane lists the outputs for the configured cameras.
O C
UTPUT FOR A AMERA
MAXPRO NVR Operator's Guide