Table of Contents
Advertisement
„ The detailed Smart LCD description of each item is shown below:
Parameters
30.3W
It means the output power port of the PoE switch.
(example)
It means the port is overloaded corresponding to the PSE, and the
OLP
port stops powering.
It means the port corresponding to the PSE is lightly loaded and
the port stops powering (When the current on the network is less
ULP
than 7.5mA, the PSE thinks the PD has been dialed out and the
port stops powering).
It means the port corresponding to the PSE appears to be short-
SCP
circuited and the port stops powering.
It means the white and blue OFF shows that the port is blocked by
OFF
the menu command.
---W
It means the port is without a PD device insert.
---M
It means this port does not have data transfers.
<1M
It means this port data rate transfers less than 1M.
The white and blue character represents the data transmission rate
while the red character represents the data transmission rate which
33M
is greater than the bandwidth setting, causing power to restart the
(example)
PSE port. If the resumption situation happens for 10 times within 1
hour, the power supply to the port will be cut off.
PB
It means power budget.
TB
It means total PoE power output information.
PD
The number of PDs inserted.
2.1.2 LED Indicators
„ System
LED
Color
PWR
Green
14
Lights to indicate that the Switch has power.
Description
Function
Advertisement
Table of Contents
