Table of Contents
Advertisement
2. Hardware Description
These switches provide three different running speeds – 10Mbps, 100Mbps and
1000Mbps and automatically distinguish the speed of the incoming connection. This
section describes the hardware features of LCD Switch. For easier management
and control of the LCD Switch, familiarize yourself with its display indicators and
ports. Front panel illustrations in this chapter display the unit LED indicators.
Before connecting any network device to the LCD Switch, please read this chapter
carefully.
2.1 Front Panel
The front panel of the LCD Switch consists of 4 10/100BASE-TX 802.3bt PoE++
ports, 12 10/100BASE-TX 802.3at PoE+ ports, 2 10/100/1000BASE-T RJ45 ports
and 2 additional 10/100BASE-X SFP ports. The LCD monitor and LED Indicators are
also located on the front panel of the LCD Switch.
Menu (5 sec)
Up
Enter
PWR
Back
Down
PoE
„ Fast Ethernet TP interface (Port 1 to Port 16)
10/100BASE-TX copper, RJ45 twisted-pair: Up to 100 meters.
Ports 1 to 4 support IEEE 802.3bt.
Ports 5 to 16 support IEEE 802.3at.
„ Gigabit TP Interface (Port 17 to Port 18)
10/100/1000BASE-T copper, RJ45 twisted-pair: Up to 100 meters.
„ Gigabit SFP Slots (Port 19 to Port 20)
10/100BASE-X mini-GBIC slot, SFP (Small Factor Pluggable) transceiver module:
From 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilometers
(single-mode fiber).
„ Smart LCD
The Smart LCD that is located on the front panel of the FGSW-2022VHP
provides "PoE Management and Status", "Switch Mode: Standard, VLAN, Extend",
"Budget and Bandwidth Control", "PD alive check", "Screen Saver", "PD Type",
"Password", "Fan Control", and " Factory Default".
12
2
FGSW-2022VHP
Gigabit
2
4
6
8
10
12
14
16
18
20
LNK
ACT
1
3
5
7
9
11
13
15
17
19
100
1000
LNK
ACT
1
PoE-in-Use
Figure 2-1: FGSW-2022VHP Front Panel
12-Port 10/100TX
4
6
8
10
12
14
16
4-Port 10/100TX
4-Port Gigabit Ethernet Switch
3
5
7
9
11
13
15
20
802.3at PoE
+
18
802.3bt PoE
+
17
19
Advertisement
Table of Contents
