Table of Contents
Advertisement
Step 6: Proceed with Steps 4 and 5 of session 3.1 Desktop Installation to
connect the network cabling and supply power to your Switch.
3.3 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot of the LCD
switch. The SFP transceivers are hot-pluggable and hot-swappable. You can plug
in and out the transceiver to/from any SFP port without having to power down the
LCD switch, as Figure 3-4 shows.
„ Approved PLANET SFP Transceivers
PLANET LCD Switch supports both single mode and multi-mode SFP transceivers.
The following list of approved PLANET SFP transceivers is correct at the time of
publication:
Gigabit SFP Transceiver Modules
„ MGB-GT
SFP-Port 1000BASE-T Module
„ MGB-SX
SFP-Port 1000BASE-SX mini-GBIC module - 550m
„ MGB-LX
SFP-Port 1000BASE-LX mini-GBIC module - 10km
„ MGB-L30
SFP-Port 1000BASE-LX mini-GBIC module - 30km
„ MGB-L50
SFP-Port 1000BASE-LX mini-GBIC module - 50km
„ MGB-L70
SFP-Port 1000BASE-LX mini-GBIC module - 70km
„ MGB-L120
SFP-Port 1000BASE-LX mini-GBIC module - 120km
„ MGB-LA10
SFP-Port 1000BASE-LX (WDM, TX:1310nm) - 10km
„ MGB-LB10
SFP-Port 1000BASE-LX (WDM, TX:1550nm) - 10km
„ MGB-LA20
SFP-Port 1000BASE-LX (WDM, TX:1310nm) - 20km
„ MGB-LB20
SFP-Port 1000BASE-LX (WDM, TX:1550nm) - 20km
„ MGB-LA40
SFP-Port 1000BASE-LX (WDM, TX:1310nm) - 40km
„ MGB-LB40
SFP-Port 1000BASE-LX (WDM, TX:1550nm) - 40km
28
Figure 3-4: Plugging in the SFP Transceiver
1
MGB-Series Module
2
LC Fiber Cable
Advertisement
Table of Contents
