Printing Tests And Normal Cleaning After Daily Operations - Roland LEF-12 Master Manual

Pausing or Canceling Output
You can pause and cancel printing before it finishes. However, we do not recommend resuming printing
because colors may be uneven in the place where output stopped.
Procedure

Press while printing.
This pauses printing operation.
Press again if you want to resume printing.
To cancel the printing, go the next step without pressing

TO CANCEL, HOLD
DOWN SETUP KEY

Stop sending the output data from the computer.

Printing Tests and Normal Cleaning After Daily Operations

Make sure to check for dot drop-out by performing printing tests after daily operations. If dot drop-out is
present, perform normal cleaning.
 P. 20, "Printing Test and Normal Cleaning"
If problems such as dot drop-out persist even after you have performed normal cleaning several times, then
perform medium or powerful cleaning.
 P. 60, "Periodic Cleaning Maintenance"
When the screen shown in the figure appears, press
.
This cancels printing operation.
Basic Operation
.
Chapter 1 Basic Operation
27