Step1: Preparing for the Start of Daily Operations
Perform a printing test to ensure no dot drop-out or dot displacement occurs. If dot drop-out or dot displacement
occurs, clean the print heads (normal cleaning).
1.
Turn on the sub power.
Turn on the sub power to begin the day's work. If using white ink, be sure to mix the ink in the cartridge first.
Procedure
1.
When using white ink, remove just the white ink cartridge and shake it 50 times (about 20 seconds).
So that the ink mixes well, shake the ink cartridge horizontally with a stroke length of around 5 cm (2 in.)
from each end of the ink cartridge.
2.
Press the sub power button.
Initialization is complete when the following screen appears.
SETUP MEDIA
Printing method
1. Printing Operations
45